Starter Kits,Controller Board, Sensor Modules Factory
DIY Educational programmable Robot Projects manufacturer
|Place of Origin:||Guangdong China (Mainland)|
|Certification:||CE, FCC, RoHS|
|Minimum Order Quantity:||10 Piece/Pieces|
|Packaging Details:||Different package at optional: 1. Retailing Package: Crystal box 2. Bulking Packing:plastic case 3. Retailing Box package design according to your requirement( Order > 1000PCS)|
|Delivery Time:||1-3 workdays after payment|
|Payment Terms:||PayPal, L/C,D/A,D/P,T/T Bank Transfer,Western Union,MoneyGram|
|Supply Ability:||10000 Piece/Pieces per Day|
|Sample Order:||Acceptable||Factory Outlet:||Yes|
|OEM/ODM:||Available||Delivery Time:||1-3 Days|
|User:||Students,Engineers Etc.||USB Protocol:||USB V1.1/2.0.|
|Frequency:||2.4GHz ISM Band.||Transmission Power:||Class2, 4dbm|
arduino sensors kit,
arduino temperature sensor
6 Pin HC-05 Wireless Module Transceiver Module Serial RS232 Wifi Module
|Color||with the chassis HC-05 master and slave integrated|
|PCB size||37.3mm (length) * 15.5mm (width)|
|Input voltage||3.6V - 6V, prohibit more than 7V|
Power supply anti-reverse, then the module does not work
6 feet: EN / VCC / GND / RXD / TXD / STATE (Wireless status pin, not connected to the output low, connected to the output high)
With the connection status indicator, LED flash means no Wireless connection; LED slow flash to enter the AT command mode
On-board 3.3V regulator chip, input voltage DC 3.6V-6V; unpaired, the current is about 30mA (due to LED flashing, the current is in a state of change); matching success, the current is about 10mA
Interface level 3.3V, you can directly connect a variety of single-chip (./51/AVR/PIC/ARM/MSP430, etc.), 5V microcontroller can also be directly connected. Directly connected to the microcontroller serial port, not through the MAX232 chip!
Effective transmission distance of 10 meters, more than 10 meters is also possible, but do not guarantee the quality of the connection
After successful pairing, can be used as a duplex serial port. No need to understand any Wirelessprotocol, but only supports 8-bit data bits, 1 stop bit, no parity communication format. This is also commonly used in Z communication format, do not support other formats!
Press the button to power the Wireless module can enter the AT mode, set the parameters and query information
The host and slave modes can be switched via the AT command
The default baud rate is 9600 and the default pairing password is 1234. The default name is HC-05
With transparent heat shrink tubing protection
Second, the wiring method:
VCC: Connect the power supply positive
GND: Connect the power supply negative
RXD: the receiving end, the Wireless module receives the data sent from other devices; normally send the TXD of the other device
TXD: the sender, the Wireless module to send data to other devices; normal access to other devices receiving RXD
EN: Enabled, need to enter AT mode when connected to 3.3V
1 cm = 0.3937 "
1. Please allow 1-3cm differences due to manual measurement.
2. Clothing Asian size is usually 2 yards smaller than the US / EU / UK, please compare carefully before ordering.
12. The real color may be slightly different from the photo, due to a variety of factors such as computer screen contrast or light.
Contact Person: Fernando