Tel:
China Starter Kit for Arduino manufacturer
Oky Newstar Technology Co., Ltd

Starter Kits,Controller Board, Sensor Modules Factory

DIY Educational programmable Robot Projects manufacturer

Home ProductsShield for Arduino

Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino

Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino

  • Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino
  • Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino
  • Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino
  • Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino
Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino
Product Details:
Place of Origin: Guangdong China (Mainland)
Brand Name: Oky Newstar
Model Number: wifi shield
Payment & Shipping Terms:
Minimum Order Quantity: 1 Piece/Pieces
Price: negotiable
Packaging Details: 15cm x 10cm x 3cm
Delivery Time: 3-5 workdays after payment
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Supply Ability: 1000 Piece/Pieces per Day
Contact Now
Detailed Product Description
Wifi Chip: WizFi210 Radio Protocol: IEEE 802.11b/g/n Compatible
Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b) Modulation: DSSS And CCK
RF Operating Frequency: 2.4 - 2.497 GHz Antenna Options: Chip Antenna And U.FL Connector For External Antenna
High Light:

arduino uno shield

,

arduino bluetooth shield

 

Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino

 

 

Description:

 

The shield uses WizFi210 which is a low power-consuming WIFI module which is applied with dynamic power management technology. When the WIFI module needs to be on but not work, it can be set to standby mode a low power mode, and the module just needs to be woken up when it has to work.

 

The WIFI wireless module is based on WizFi210. It provides the bridging from TTL serial port communication to IEEE802.11b/g/n wireless communication. So any device with TTL serial ports can easily be connected with this WIFI module and controlled and managed remotely through a wireless network. Different kinds of communication protocols and encryption algorithms are integrated with the module. The architecture enables you to easily integrate this module into any projects for Arduino.

 

 

Specification:


- Wifi Chip: WizFi210;
- Radio Protocol: IEEE 802.11b/g/n Compatible;
- Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b);
- Modulation: DSSS and CCK;
- RF Operating Frequency: 2.4 - 2.497 GHz;
- Antenna Options: Chip antenna and U.FL connector for external antenna;
- Networking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS


- Power Consumption(Typical): Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA;
- RF Output Power (Typical): 8dBm ± 1dBm;
- Security Protocols: WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP;
- I/O Interface: UART,WAKE, ALARM, GPIOs;
- Power Source: 3.3V;
- Dimensions(except Antenna): 59mm x 54 mm x 11mm

-Data rate: 54Mbps-1Mbps

-Data flow transmission rate: 11,5.5,2Mpbs (802.11b)


- Shipping List:
- WiFi Shield V2.1 for Arduino (1 unit);
- Antenna (1 unit).

 

 

 

Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino 0

 

 

Factory Pictures

 

 

Wireless Wifi Module Shields V2.1 For Arduino , Shield For Arduino 1

 

 

 

Competitive Advantage:
 

1. Convenient & Friendly Customer Service

2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around The Globe. 
4. High Quality With Global Standards. 
5. 3 year factory warranty
6. Safe shipping way and payment

 

 

 

 

 

 

 

Contact Details
Oky Newstar Technology Co., Ltd

Contact Person: Ms. Erica Teng

Tel: +8613410424757

Send your inquiry directly to us
Oky Newstar Technology Co., Ltd
Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China
Tel:86-755-23578860
Mobile Site Privacy Policy China Good Quality Starter Kit for Arduino Supplier. © 2013 - 2021 diyelectronicskit.com. All Rights Reserved.