Tel:
China Starter Kit for Arduino manufacturer
Oky Newstar Technology Co., Ltd

Starter Kits,Controller Board, Sensor Modules Factory

DIY Educational programmable Robot Projects manufacturer

Home Products3D Printer Kits

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire

  • Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire
  • Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire
  • Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire
  • Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire
Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire
Product Details:
Place of Origin: China
Brand Name: oem
Model Number: 3D Printer Kit Hotend
Net Weight: 0.3mm/0.35mm/0.4mm/0.5mm
Layer Thickness: 0.3mm
Fully 3D printer kit: YES
Power supply: 3mm and 1.75mm
Print Material: ABS PLA
Color: as the picture
Payment & Shipping Terms:
Minimum Order Quantity: 1 piece
Packaging Details: Standard Packing
Delivery Time: within 3-5workdays after payment
Payment Terms: L/C, D/A, D/P, T/T,Western Union,Credit card payment
Supply Ability: 1000 pieces for one month
Contact Now
Detailed Product Description
High Light:

3d printer model

,

diy 3d printer kit

 

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire

 

 

 

Quick Details:

 

1.The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

2.built-in heat-resistant teflon.

3.It won't be deformed though against high temperature.

4.It has good ventilation and fast heat dissipation.

5.The ABS and PLA filament will be conveniently put into the feeding inlet with the boot head.

6.no need to wrap nichrome wire or to bake a heater core

 

 

Desctription:

 

This J-Head Hot End is assembled and designed based on other nozzle. It's very simple by reducing the number of custom machined parts to a bare minimum. The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

 

The filament path is same with teh one of an already proven design, it can be used to print reliably with both ABS and PLA. If using PLA, it requires a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder. Besides, the Hot End has another two advantages. Heat transmission is more efficiency as there is no thermal junction where a separate heater screws onto the nozzle. And a resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.

 

 

Specification:

 

Optional Nozzle:0.3mm/0.35mm/0.4mm/0.5mm

With 70cm cables

Feeding inlet diameter:3mm and 1.75mm ABS and PLA filament

 

 

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire 0

 

 

Factory Pictures

 

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire 1

 

 

 

 

Competitive Advantages:

 

1. Convenient & Friendly Customer Service.

2. Low Prices Direct From Factory Suppliers.
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty.
6. Safe Shipping Way and Payment.

 

 

Contact Details
Oky Newstar Technology Co., Ltd

Contact Person: Ms. Erica Teng

Tel: +8613410424757

Send your inquiry directly to us
Oky Newstar Technology Co., Ltd
Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China
Tel:86-755-23578860
Mobile Site Privacy Policy China Good Quality Starter Kit for Arduino Supplier. © 2013 - 2021 diyelectronicskit.com. All Rights Reserved.